Download or read book Electronic Manufacturing Process Improvement (EMPI) for Automatic Winding of Quadrupole Fiber Optic Gyro Sensor Coils written by and published by . This book was released on 1993 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the EMPI program was to design an Automatic Coil Winding Station (ACWS) for winding Fiber Optic Gyro (FOG) sensor coils through the use of TQM, QFD, etc., followed by use of Taguchi and other statistical techniques to optimize the coil winding process. Four phases were involved: Process Definition, Critical Factor Identification, Variability Reduction, and SPC Implementation. Winding FOG coils are both difficult and fragile in that it is a quadrupole wind -- as opposed to the conventional thread wind -- compounded by the requirement for low tension precision, high-fiber packing density, and always risk of damage to the delicate fiber itself. The critical factor identification in the quadrupole winding process was reduced to fiber crossover -- a significant detrimental influence on gyro performance -- which, in turn, was closely identified with fiber gap control. The station was completed and deployed to the field where production coils are currently being wound. The ACWS not only lowered the required labor skill but succeeded in reducing the winding time 94 percent while improving the yield and performance through improved process control. Statistical process control, Fiber Optic Gyro (FOGs), Electronic Manufacturing process improvement, Automatic Coil Winding Station (ACWS), Total Quality Management (TQM), Quality function deployment, Statistical Process Control (SPC), Variability Reduction Program (VRP).