Download or read book Surface Chemistry and Work Function of Irradiated and Nanoscale Thin Films Covered Indium Tin Oxides written by Hui Che and published by . This book was released on 2018 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this study, we used UV-ozone Ar sputtering, X-ray photoelectron and ultra-violet photoelectron spectroscopies and sputtering based depositions of RuO2 and Se nano-layers on indium tin oxides (ITOs). We elucidated the effect of Ar sputtering on the composition and chemistry of Sn rich ITO surface. We demonstrated that while a combination of UV-ozone radiation and Ar sputtering removes most of the hydrocarbons responsible for degrading the work function of ITO, it also removes significant amount of the segregated SN at the ITO surface that's responsible for its reasonable work function of 4.7eV. We also demonstrated for the first time that sputtering cleaning ITO surface leads to the reduction of the charge state of Sn from Sn4+ to Sn2+ that adds to the degradation of the work function. For the nano-layers coverage of ITO studies, we evaluated both RuO2 and Se. For RuO2 coated ITO, XPS showed the formation of a Ru-Sn-O ternary oxide. The RuO2 nano-layer reduced the oxidation state of Sn in the Sn-rich surface of ITO from +4 to +2. The best work function obtained for this system is 4.98eV, raising the effective work function of ITO by more than 0.5 eV. For the Se coated ITO studies, a systematic study of the dependence of the effective work function on the thickness of Se overage and its chemistry at the Se/ITO interface was undertaken. XPS showed that Se reacts with Sn at the Sn-rich surface of ITO determined the presence of both negative and positive oxidation state of Se at the Se/ITO interface. The Se also reduced the oxidation state of Sn from Sn4+ to Sn2+ in the Sn-rich ITO surface. The highest effective work function obtained for this system is 5.06eV. A combination of RuO2/Se nanoscale coating of optimally cleaned ITO would be a good alternative for device applications that would provide work function tuning in addition to their potential ability to act as interface stabilizers and a barrier to reaction and inter-diffusion at ITO/active layers interfaces responsible for long term stability of devices and especially organic solar cells and organic light emitting diodes.